PFT-1003CM and PFT-1003CMF

PFT Series – AC High Voltage Dielectric Test Set

0 – 100 kV AC Power Frequency AC Hipot

Interested
in the ?

Features and Benefits

The PFT-1003CM and PFT-1003CMF are from our popular PFT Series of field portable AC hipot test sets. These hipots provide continuously adjustable AC voltage used for a pass/fail, AC over-voltage withstand test on high voltage apparatus, like switchgear, circuit breakers, reclosers, vacuum bottles, hot sticks, bus duct, and any other apparatus needing an AC test voltage. The PFT Series offers the most field portable, affordable, and easiest to operate AC hipots at this voltage and power. A gapped core transformer for up to 3 kVA of output power with the draw of only 1.5 kVA so the hipot can be powered by a standard 120Vac or 230Vac input. Equipped with a two-range voltmeter, three-range current meter and guard circuit for precise leakage current measurements. For bench-top requirements see the ABT Series. Testing loads that require higher power, see our ALT, FPA, HPA and PAR lines of AC dielectric test sets.

Convenient two-piece field portable design
Secondary connected 2 Range Voltmeter: 0 – 50 / 100 kV AC
3 Range Current Meter: 0 – 1 mA AC with x1, x10, and x100 multipliers
Fixed overload set to 120% of variable transformer rated output current
Transit protected meters prevent meter damage between test sites
Guard/Ground circuit for accurate leakage current measurement
Gapped core transformer design for capacitive load compensation
Zero Start and External safety Interlock provisions

Specifications

Model	PFT-1003CM / PFT-1003CMF
Input:	(PFT-1003CM) 120 V, 60 Hz, 15 A (PFT-1003CMF) 230 V, 50/60 Hz, 8 A
Output:	0-100 kV AC, 1 kVA resistive load 3 kVA capacitive load, up to 30 mA current Output current is reduced at lower voltages
Duty:	3 kVA: 1 hour ON, 1 hour OFF 1.5 kVA: continuous
Voltmeter:	3.5”, scaled 0-50/100 kV AC, ±2% F.S.
Current Meter:	3.5”, scaled 0-1 mA, ±2% F.S. with range multipliers of x1, x10, x100
Distortion:	Less than 5%
Size & Weight: (W x D x H)	19 x 11 x 11 in., 34 lb. 483 x 280 x 280 mm, 15kg
Options:	The PFT-1003CM AC hipot can be upgraded to include a fault burning circuit, and a hand cart is available to enhance portability.
HV Section Size & Weight (W x D x H)	12 x 13 x 24 in., 82 lb. 310 x 330 x 610 mm, 38kg
Output Termination	Top Toroid
Scope of Supply	20ft black ground lead, 20ft shielded return cable, external interlock plug, operations manual, calibration certificate